Unpacking CCTV Firmware

April 25, 2015

I’ve been increasingly interested interested in firmware and have also stated in my previous articles that I would write an article on unpacking and hacking firmware. I thought this would be a good start. This isn’t some old firmware, the build date is February 2015 and has some interesting features. I see a lot of people writing articles on routers and thought I’d change things up a little and look at CCTV.

aFirst of all the firmware on this brand is publicly available, which is obviously great for me and it includes some release notes and a image file. The first thing I notice when looking through the hex is this:

bHaving a little search through the internet I find it’s a particular processor which is optomised for such things as CCTV monitoring. Nothing else grabs my attention after this, I can’t find any magic numbers manually. So I move on to what most people do and look to binwalk to identify for me, what I have in this .img file.

cSeems like we don’t have a whole lot of work on our hands in extracting this, looks like just some simple compression. I had a hunch but wanted to be fully sure of the entry points (manually checking entry points are annoying). Potentially you can view the .img to see that gzip is used, there are many strings to give it away.

Edit: Someone has pointed out that gzip strings doesn’t neccessarily mean gzip. You must still search for a magic number.

dAfter using binwalks extract functionality I was presented with 2 files. The first file I checked seemed to be a simple tar archive and was easy enough to just use tar to extract the contents of it. So far, so good.

eThe other file returned just data when trying to identify it. I decided to delve back into a hex editor and found a magic string that looked like a squash file system. I also found some paths that would relate to a file system.

f

I extracted it with binwalk and was full of crt files and a config file. Edit: This is the kernel config file.

gA little nosey around the file system and I find something interesting. To run a web interface for the user, the firmware runs Lighttpd, this will allow it to use a lightweight application to run a web server. hIn the web directory, the first thing that strikes me is the lack of robots.txt, I’ve just checked and I have found multiple sites running this particular software. I could share dorks, but some of these sites are charities, and so I’ve decided not to. I’ll have a show of what it looks like though; it runs on Java, which isn’t.. amazing. Most have not implemented it with authentication (atleast the ones spidered).

 

iI decided I didn’t want to destroy the system (I’m only looking), and decide to just view “Live View”. Nothing spectacular about it, but still, it’s a CCTV with no authentication. Which is due to the CCTV administrators not the manufacturer. Although robots.txt wouldn’t go a miss here.jDepending on what device you are using and where you are located will depend on what java applet you get. It goes through some trivial checks on what device you use (although obviously the check doesn’t have to be extensive) before giving you a version that suits you. Mobile’s are not served with an applet by viewing it on a browser. Instead it gives you simply a “setup” option.

k

The applet itself drops a .dll onto your home folder in Java. In the folder “CWS”, nothing too major about the applet, nothing was obfuscated or anything just a simple read through JD-GUI will do for me.

lOn further inspection of the .dll file it seems its packed with a common packer that a lot of people use, UPX. This could be a potential problem because dropping a .dll from Java which is packed by UPX could start off a few AV’s. UPX is widely triggered as either malicious or PUP by AV’s due to the sheer amount of malware that uses the packer. Customers may be turned away if the Java applet keeps getting detected as malicious. UPX is really easy to unpack so I won’t show anything here, what I do see is that it seems an outsourced job for the software there are many comments in the PHP code which seem to be Korean and although it’s nothing much the language on the bins are Korean.

m

I haven’t had much time to look at reversing the files yet, but it was very easy for me to just view the camera, although, I am unable to control it, privacy issues exist with people not correctly authenticating the machine. The code seems very rushed or unorganised. There is a page that shows you all the information about the device, this can be used by an attacker to find specific flaws. I’m also given a list of all buyers of this software, so I can exploit there systems too!

qThat’s all from me for now.

5 Comments
crystalboy
April 26, 2015 @ 11:48 am

Nice job and very interesting article man, thanks for sharing. 🙂

Reply
ken.basho
April 27, 2015 @ 11:57 am

can you tell us what tools used for this experiment?

Reply
    jack
    April 28, 2015 @ 1:27 pm

    I stated I used binwalk, if that’s what you’re talking about.

    Reply
phosphore
April 28, 2015 @ 10:00 am

Here’s another “security” company

Reply
    jack
    April 28, 2015 @ 1:27 pm

    way too easy for me to unpack and view contents to create a Google dork.

    Reply

Leave a Reply to crystalboy Cancel reply

Your email address will not be published. Required fields are marked *


*